SOtM docs

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
en:eunhasu:installing_x86 [2019/02/27 18:44]
admin [Boot the sMS-1000SQ]
en:eunhasu:installing_x86 [2019/03/10 22:35] (current)
admin [Boot the sMS-1000SQ]
Line 26: Line 26:
   - Hit F10 key to go to the booting disk selection screen. The F10 key should be hit at the same time when the unit is powered on.   - Hit F10 key to go to the booting disk selection screen. The F10 key should be hit at the same time when the unit is powered on.
   - Select the inserted USB installation disk and start booting the device.   - Select the inserted USB installation disk and start booting the device.
 +
 +=== If you change the OS from the Vortexbox or Windows Edition to Eunhasu OS ===
 +
 +  * You will need to enable UEFI boot before installing Eunhasu OS newly. ​
 +
 +  - Please enter to BIOS setup by hitting F2 button once you power up the sMS-1000SQ.
 +  - Go to Boot menu, and check UEFI boot is enabled. If it is disabled, please make it enabled.
 +  - Go to Exit menu for Exit Saving Changes.
 +{{ :​ko:​eunhasu:​uefi_1.jpg?​600 }}
 +{{ :​ko:​eunhasu:​uefi_2.jpg?​600 }}
  
 === If the boot disk selection screen is not shown up === === If the boot disk selection screen is not shown up ===