This instruction is for Eunhasu upgrade which is not able to upgrade by clicking the upgrade button on the Eunhasu upgrade page. There are 3 ways to do the upgrade. First, [[https://en.wikipedia.org/wiki/Samba_(software)|Samba]] : It is for Windows file sharing protocol. To access sMS-200 through SMB, type [[\\eunhasu\mwdata\music|\\eunhasu\mwdata\music]] in windows file explorer. The sMS-200 should be connected in the same network. Second, USB memory stick : It is internal debug mode. To use this method for the upgrade, several conditions should be matched. Finally, imageUSB utility : This is external application to write entire image of the latest version to SD card. ====== ====== ====== By samba share ====== - Download upgrade-last.tar file from server * [[http://sotm-audio.com/eunhasu/upgrade/sotm/armv7l/release/upgrade-last.tar|sMS-200]] - Copy upgrade-last.tar to Eunhasu samba directory [[\\eunhasu\mwdata\music|\\eunhasu\mwdata\music]] - Eunhasu page will be loaded like [[http://eunhasu/upgrade.php?upgrade_server=eunhasu/music&force=1|http://eunhasu/upgrade.php?upgrade_server=eunhasu/music&force=1]] - //upgrade_server={EUNHASU_IP}/music// is possible ====== By USB ====== - Format USB to FAT32 - Change USB label to SOTMDEBUG and it must be upper case - Download upgrade-last.tar file from server * [[http://sotm-audio.com/eunhasu/upgrade/sotm/armv7l/release/upgrade-last.tar|sMS-200]] - Copy the downloaded upgrade-last.tar to the USB root directory - Download [[http://docs.sotm-audio.com/lib/exe/fetch.php?media=en:run_debug.txt.doc|this file]] and rename to run_debug.txt - Copy run_debug.txt to the USB root directory - run_debug.txt file must contain following strings upgrade force - Remove whole inserted USB stick on sMS-200 - Insert SOTMDEBUG USB to sMS-200 - On working, blink the left LED - After finishing, the left LED off ====== By external utility ====== * sMS-200 - [[:en:how_to_enable_gigabit_ethernet_in_sms-200#software|Refer Here]]